Toggle Nav

ABS-like 3D resin, Clear, 1L

SKU

ABS-like_3D_resin_Clear_1L

In Stock

43.93EUR 35.00EUR

3D printing resin, clear, 1L, 405nm UV Cure

90% ABS 3D resin

Anti-scratch

Super strong and tenacity

Great weathering

Suitable for different post processing like drilling, screwing etc.

Non VOC, RoHS certificated

Printing parameter
	ABS-like resins are perfectly on most brand LCD printer, and fast printing on DLPs.

Printing time	For LCD printer, bottom layer 30-70s and each layer exposure time 4-12s, for example, layer thickness 50 micron on Anycubic printer, base 50s while each layer 8s. For DLP printer, bottom 5-15s and each layer 1-5s.
Cleaning and post-curing	1), Spray with Isopropanol, then blow resin away with cool wind. 2) Prepare two containers with Isopropanol (alcohol> 95%), and place the jobs into the first container and slightly shake it, then soak in the second container for about 1 minute 3)Flush with water before dry it, do make it sure it ‘s 100% dried as residuary alcohol may cause white spot or crack on jobs.
Post-curing	1) The curing time is proportional to the volume of the work piece and inversely proportional to the optical power of the curing chamber. Example: 100 watt LED curing box, jewelry jobs is recommended to be cured with soaking in water for 20-30 minutes. 2) The post-cure time of dental casting resin, dental non-casting resin and jewelry mold resin shall not more than 5 minutes. 3) Work-pieces should be in the water during post-curing to prevent deformation especially for dental and jewelry. 4) Don’t forget to use cool air to dry it after post-curing.